Characteristics
Number of CDUs
Frequency band
Max. number of TRXs
Number of feeders
Number of antennas
Antenna configuration
TMA configuration
Note:
4.5.4
RX Connection from Antenna to dTRU
Connection in the RX path is performed using the CXU. It varies,
depending on the basic configurations used and the position in the
cabinet. To avoid having to change cables for different configurations,
the connections are set up automatically by the software.
The TX antenna connections are independent of the CXU.
The tables below show how TMAs and their associated bias injectors
are connected to configurations using TMAs.
Table 14
CDU
No. / Connector
1 / TX / RX
3 / TX / RX
Table 15
CDU
No. / Connector
1 / TX / RX1
3 / TX / RX1
EN/LZT 720 0008
P2A
2001-11-28
Radio Configurations, RBS 2106 and RBS 2206
The ASU is optional equipment.
1 x 12 configurations with CDU-F
TMA
No. (TMA config. only)
1
5
1 x 12 configurations with CDU-G
ASU Connector
(Co-siting only)
1
5
© Ericsson Radio Systems AB
— All Rights Reserved —
3
GSM 800
E-GSM
GSM 1800
GSM 1900
12
6
6
2 x TX/RX + 4 x TX
ddTMA + ddTMA
Antenna
TX / RXA
TX / RXB
TMA
No. (TMA config. only)
1
5
(G8dht_6.12)
(G9deht_6.12)
(G18dht_6.12)
(G19dht_612)
Antenna
TX / RXA
TX / RXB
67 (485)