Environmental Capabilities; Scope; Terminology - Ericsson RBS 2106 Reference Manual

3

Environmental Capabilities

3.1

Scope

This chapter covers the environmental requirements for the indoor and
outdoor temperature non-controlled operation conditions. Subjects
covered are: Climatic, Biological, Chemically active substances,
Mechanically active substances and Mechanical conditions.
3.2

Terminology

Definition of concepts:
Normal operation conditions
Environmental conditions where all units shall be able to function as
specified.
Safe function
Environmental stress above the limits for normal operation where all
units shall continue to function during the stress, but performance or
capacity may be reduced.
Reduction of performance or capacity shall be documented as typical
value.
When the environmental stress has dropped to normal operation
conditions, function as specified shall automatically be achieved.
Safe function refers to an operation period of not more than 72
consecutive hours, and a total of not more than 15 days in one year.
Non-destruction
Environmental stress above the limits for safe function during which no
function is guaranteed and performance may degrade in an unspecified
manner.
When the environmental stress has dropped to normal operation
conditions, no manual intervention (on site) is needed to restore full
performance of the RBS.
Non-destruction refers to an operation period of not more than 96
consecutive hours, and a total of not more than 5.5 days in a 3 years
period.
GSM concepts
The GSM concepts for Normal operation and Extreme operation
conditions as defined in GSM 11.20-12.3.2 are both equal to the
Normal condition as defined and used in this document. This means, all
RF parameters are guaranteed within the Normal condition range as
defined in this document.
EN/LZT 720 0008 P2A
2001-11-28
© Ericsson Radio Systems AB
— All Rights Reserved —
Environmental Capabilities
21 (485)