Ericsson RBS 2106 Reference Manual page 26

Environmental Capabilities
The severity of these requirements is in conformity with IEC 721-3-1
classes 1K4/1Z2/1Z3/1Z5. and ETS 300 019-1-1 class 1.2
Requirements
Table 4
Environmental Parameters
Temperature
Relative Humidity
3.5.3 Biological conditions
The severity of these requirements is in conformity with IEC 721-3-1
class 1B2. and ETS 300 019-1-1 class 1.2
3.5.4 Chemically Active Substances
The severity of these requirements is in conformity with: IEC 721-3-1
class IC2 and ETS 200 019-1-1 Class 1.2.
Note:
3.5.5 Mechanically Active Substances
The severity of these requirements is in conformity with: IEC 721-3-1
class 1S3. and ETS 300 019-1-1 Class 1.2.
3.5.6 Mechanical Conditions
The packing and transport method shall be chosen in order not to
expose the equipment to stress beyond these limits. The equipment
shall function as specified when installed after test.
The severity of these requirements is in conformity with: IEC 721-3-1
class 1M2. and ETS 300 019-1-1 Class 1.2.
Requirements
Table 5
Environmental Parameters
Vibration sinus:
Shock:
24 (485)
Unit

%
The values are average yearly levels of airborne
contaminants that can be accepted. It is assumed that one of
the contaminants is dominant at each site, and that the other
is present in insignificant amounts.
displacement
acceleration
frequency
peak acceleration
duration
© Ericsson Radio Systems AB
— All Rights Reserved —
Value
- 25 - +55
C
10 -100
Unit
mm 3.5
m/s²
Hz 2-9
m/s²
ms
Value
10
9 -200
40
22
EN/LZT 720 0008 P2A
2001-11-28