Ericsson RBS 2106 Reference Manual page 389

48.3.6 ARAE Supervision Parameters
The following user functions, related to the ARAE, are available in the
OMT:
•
•
•
•
The output can be displayed or directed to file (output stored in a file on
the OMT).
48.3.7 Modify TN O&M Values
This function modifies the Transport Network O&M parameters in the
IDB. There are three TN O&M parameters in the TNOM_information
element that are possible to modify:
TNOM_use. Indicates if TN O&M functionality is activated or not.
TNOM_timeslot. Indicates which 64 kbit/s timeslot on the PCM link to
use for TN O&M communication.
TNOM_nodeid. Holds the identity of the BTS node in the TN O&M
network.
48.3.8 Display TN O&M Values
This function displays the value of the TN O&M parameters, which are
stored in the TNOM_information element in the IDB (see parameters
above).
48.3.9 Calibration of Optional Reference Oscillator
This function is used to calibrate the optional reference oscillator.
48.3.10 Cable Loss
The following user function, related to Cable loss, is available in the
OMT:
•
•
48.3.11 ALNA/TMA Parameters
The following functions, related to ALNA/TMA parameters are
available in the OMT.
•
EN/LZT 720 0008 P2A
2001-11-28
Auxiliary Faults are possible to define for each alarm inlet.
The alarm inlets can be used for both External Alarms and for
ARAE Supervision.
The definition of the ARAE Supervision Parameters is displayed.
Monitor ARAE fault status.
Define cable loss, defines cable and feeder loss values.
Display cable loss, displays cable and feeder loss values.
Define ALNA/TMA parameters.
In OMT state LOCAL and in OMT state CONNECTED, it is
possible to define values for the following:
– Current Supervision Limits
© Ericsson Radio Systems AB
— All Rights Reserved —
Operation and Maintenance Terminal
387 (485)