Ericsson RBS 2106 Reference Manual page 468

BTS Parameter Limitations
BTS-supported value range.
Nominal power parameters:
900 MHz:
1800 MHz:
1900 MHz:
IWD-defined value range:
Note:
1) BSC uses this value to activate SW Power Boost (the value does not
describe the actual output power). The RBS then uses TX diversity, and
configures each transmitter that supports the master-slave configuration
to max. power (for example 47 dec for Macro 900 MHz). An RBS
with Filter Combiner does not support SW Power Boost.
58.3.18 Result Code
BTS-supported codes:
Wrong state or out of sequence: 02
File error:
Fault unspecified:
Protocol error:
MO not connected:
IWD-defined value range:
58.3.19 TCH Capabilities
BTS-supported value:
Cross Combination Indicator: 127
IWD-defined value range:
58.3.20 TF Mode
BTS-supported code:
TF mode parameter:
IWD-defined value range:
466 (485)
35 – 47, 49
33 – 45, 47
33 – 45, 47
0 – 63
Only steps by 2 is configurable (from the highest value).
03
04
06
07
01 – 0A
0, 127
1 (= stand-alone)
00 – 02, FF
© Ericsson Radio Systems AB
— All Rights Reserved —
1
(dec)
1
(dec)
1
(dec)
(dec)
EN/LZT 720 0008 P2A
2001-11-28