Table of Contents
Advertisement
Chapter 4 - Operation and Administration
The available options are All, Alarm, State Status Change, Configuration Change
Event, System Event.
The default is All.
4.5.6.4
Show Event Log Table By Selection Criteria
Select this option to display details of all events that meet the defined filtering
criteria (see
following details are displayed:
Seq#: The sequential identification number of the event (trap).
Time: The Time and Date at which the event was generated.
ID & Name
MO Type & Instance: The Type and Instance (ID number) of the applicable
Managed Object.
Event Category
Event Type: The type of event (first level of event description).
Probable Cause: The probable cause of the event (second level of event
description, applicable only for Alarm events).
Specific Problem: The specific problem that caused the event (third level of
event description, applicable only for Alarm events).
Event/Alarm Severity: The defined severity of the Event.
Object Severity: The combined events severity for the Managed Object at the
time at which the event was generated.
Group OID Name: Applicable only for Configuration Change event. Indication
of the changed parameter or the group of parameters where a change
occurred.
4.5.6.5
Show All Event Log Table
Select this option to display all events logged in the device without any filtering.
The displayed details are the same as for
Criteria" on page
BreezeMAX Extreme
"Event Log Selection Criteria" on page
115.
114). For each event, the
"Show Event Log Table By Selection
115
BTS Menu
System Manual
Advertisement
Table of Contents
