Table of Contents
Advertisement
Chapter 4 - Operation and Administration
DFS/DCS
4.5.4.5.1
Operator ID
The Operator ID is a unique identifier of the radio network. The same Operator ID
must be used by all devices belonging to the same wireless access network.
The Operator ID is presented as x.y.z, where x, y, z are in the range 0 to 255.
The default Operator ID is 0.0.0.
The BTS will not start transmitting until a different Operator ID is defined.
4.5.4.5.2
Operator Name
An optional descriptive parameter. A string of up to 32 printable characters.
The default is null (an empty string).
4.5.4.5.3
Service Zone ID
The Service Zone ID form a part of the BS ID (see BS ID in
Service Zone may include up to a total of 32 cells, with a maximum of 18 cells
with 4 sectors per cell.
The value range is from 0 to 2047.
The default value 0.
The BTS will not start transmitting until a different Service Zone ID is defined.
4.5.4.5.4
Service Zone Name
An optional descriptive parameter. A string of up to 32 printable characters.
The default is null (an empty string).
BreezeMAX Extreme
(applicable only for 5 GHz units)
93
BTS Menu
Section
4.8.1). Each
System Manual
Advertisement
Table of Contents
