Alvarion BreezeMAX Extreme System Manual page 81

Chapter 2 - Installation
Connect the other end of the data cable to one of the following:
7
»
»
NOTE
The combined lengths of the Ethernet cables should not exceed 100m.
Data
cable
Figure 2-21: Connecting Data Cable Directly to the Backhauling Equipment
BreezeMAX Extreme
If you are not using PoE - directly to the backhauling equipment. See
Figure 2-21.
If you are using PoE (for 5 GHz units only) - to the PoE AC/DC power
supply RJ-45 connector (labeled as Radio). Connect the Ethernet port of
the PoE PS to the backhauling equipment using a standard Ethernet cable.
Connect the PoE PS to the 110/220 VAC mains. See
60
Cable Connections
Figure 2-22.
System Manual