Table of Contents
Advertisement
Chapter 4 - Operation and Administration
1DIV units:
»
»
2SIS units:
»
4.5.4.5.6
Country Code
The Country Code to be used.
In units operating in the 3.65 GHz band two Country Codes are available: FCC
(the default) and Canada. These Country Codes supports a limited band from
3650-3700 MHz.
In 3.6 GHz units the available Country Codes are Universal (the default), ETSI,
and Australia.
In 5.4 GHz FCC units a single Country Code (FCC) is supported.
In 4.9 GHz and 5.4 GHz units (excluding 5.4 GHz FCC) several Country Code
options are available to support different local regulations.
CAUTION
In 4.9 GHz and 5.4 GHz units, it is the responsibility of the Administrator to verify that the selected
Country Code, and usable frequencies within the selected Country Code, are in accordance with
relevant local regulations.
The default for all 4.9 GHz and 5.4 GHz bands is Universal.
NOTE
In 4.9 GHz and 5.4 GHz units, after changing the Country Code to FCC, the Country Code becomes
read-only and cannot be modified.
The parameters that are affected by the selected Country Code in 4.9 GHz and 5.4
GHz units are:
Supported frequency range. For details refer to
Some Country Codes may support two or more sub-bands, where some
parameters may differ among the supported sub-bands.
BreezeMAX Extreme
Single Sector Single BS with Diversity
Single Sector Dual BS with Diversity (available only if 20 MHz license is
installed)
Dual Sector Dual BS no Diversity
"Frequency" on page
99
BTS Menu
164.
System Manual
Advertisement
Table of Contents
