Table of Contents
Advertisement
Chapter 2 - Installation
For a multi-BTS site - using the GPS chaining option
The GPS and external antenna should be installed above the BTS. Make sure to
allow access to all components and consider the location of power source.
2.1.4
Power Feeding Options
There are several power feeding options for BTS including either (Power over
Ethernet (PoE) or direct 48VDC. An additional option is available for backhauling
CPE connectivity powered by the BTS. See also
on page
2.1.4.1
PoE Power Feeding
A typical site deployment with PoE power feeding a single PoE indoor-outdoor
cable (8-wires CAT5 shielded cable, max. 70m) connects the BTS to a power
supply unit, which is connected to an AC source and to Ethernet WAN/Backhaul.
See
"PoE AC/DC Power Supply" on page
BreezeMAX Extreme
54.
Figure 2-1: PoE Power Feeding Option
"Indoor Power Supply Installation"
54.
34
Site Deployment Options
System Manual
Advertisement
Table of Contents
