Alvarion BreezeMAX Extreme System Manual page 109

Chapter 4 - Operation and Administration
The default BTS Working Mode is Embedded Distributed ASN-GW Centralized
Authentication.
4.5.4.3 Connectivity
The Connectivity parameters enable viewing the current and configured values
and updating the parameters of the management interface. The Connectivity
parameters include the following:
IP Address
Subnet mask
Default Gateway
VLAN ID
VLAN Priority
4.5.4.3.1 IP Address
The IP address of the Management interface.
The default is 1.1.1.23.
Refer to the limitations described in
4.5.4.3.2 Subnet mask
The Subnet Mask of the Management interface.
The default is 255.255.255.0.
Refer to the limitations described in
4.5.4.3.3 Default Gateway
The Gateway IP address of the Management interface.
The default is 0.0.0.0 (meaning no default gateway).
The Default Gateway must be in the subnet of the IP Address. Refer to the
limitations described in
4.5.4.3.4 VLAN ID
The VLAN ID to be used with management messages.
Available values are from 1 to 4094, or 4096 for No VLAN (untagged).
The default is 4096 (No VLAN).
BreezeMAX Extreme
"IP Addresses Configuration" on page
"IP Addresses Configuration" on page
"IP Addresses Configuration" on page
88
BTS Menu
77.
77.
77.
System Manual