Alvarion BreezeMAX Extreme System Manual page 69

Chapter 2 - Installation
Drill the holes, and use four metal dowels and screws to affix the carriage to
4
the wall.
Insert the tilt control screws into the middle-side hole of the carriage on both
5
sides (see
Carriage
Holes for
wall mount
Hang the BTS with the tilt bracket on the tilt control screws of the BTS
6
carriage.
Attach and fasten all the screws at both sides of the carriage (see
7
Do not over tighten.
If required, slightly release the tilt bracket screws to enable rotation, and the
8
tilt control screws to enable tilting; Adjust the BTS position and tighten the
screws.
BreezeMAX Extreme
Figure 2-14).
Figure 2-14: Mounting the Carriage on the Wall
Till control screw
screws (to be
fastened using
dowels
48
BTS Installation
Figure 2-14).
System Manual