Table of Contents
Advertisement
12 CONTROL SUB FUNCTIONS
Example
No.20 Teaching program
Position to the target position with manual operation.
POINT
(1) Confirm the teaching function and teaching procedure before setting the positioning data.
(2) The positioning addresses that are written are absolute address (ABS) values.
(3) If the positioning operation is correctly completed with the written positioning data, it is
recommended that the positioning data be registered in the QD75 flash ROM.
2)
Carry out the teaching operation with the following program.
12 - 73
MELSEC-Q
<Pulsate teaching command>
<Hold teaching command>
<Set teaching data>
<Set positioning data No.>
<Execute teaching>
<Turn OFF teaching command
memory>
Advertisement
Table of Contents
