Installing The Carburetor - KTM Freeride 250 R EU Repair Manual

19 CARBURETOR
19.5

Installing the carburetor

Main work
–
Remove screws
–
Take off the throttle slide cover and pull the throttle slide out of the carburetor.
202690-10
–
Pull back the throttle slide spring and plastic retainer
–
Detach throttle cable
–
Take off the throttle slide.
202691-10
–
Loosen hose clip
–
Pull the carburetor out of the intake flange toward the rear.
–
Drain the remaining fuel.
202692-10
Main work
–
Position the carburetor on the intake flange.
–
Position and tighten hose clip
202692-11
–
Attach throttle cable
–
Position plastic retainer
202691-11
–
Position the throttle slide and throttle slide cover.
–
Mount and tighten screws
Guideline
Screw, carburetor cover
202693-10
.
1
.
3
.
4
.
1
.
2
.
3
.
4
.
2
M4 3 Nm (2.2 lbf ft)
148