14
WHEELS
14.6.2
Installing the rear wheel
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Main work
–
Remove nut
–
Remove chain adjuster
Info
Withdraw wheel spindle
forward.
–
Push the rear wheel forward as far as possible. Remove the chain from the rear
sprocket.
Info
Protect the motorcycle and its attachments against damage by covering
them.
–
Holding the rear wheel, withdraw the wheel spindle. Take the rear wheel out of the
swing arm.
Info
Do not operate the foot brake when the rear wheel is removed.
Always lay the wheel down in such a way that the brake disc is not dam-
B01047-10
aged.
–
Remove spacers
B01048-10
Main work
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Change the wheel bearing.
–
Clean and grease the shaft seal rings
Long-life grease (
–
Insert the spacers.
B01048-11
–
Position the rear wheel.
The brake linings are correctly positioned.
–
Insert wheel spindle
–
Put the chain on.
B01049-10
.
1
.
2
only enough to allow the rear wheel to be pushed
3
.
4
1
p. 204)
.
2
and contact surface
of the spacers.
A
73