KTM Freeride 250 R EU Repair Manual page 164

22 LUBRICATION SYSTEM
–
Remove screw cap
–
Fill in gear oil until it emerges from the drilled hole of the gear oil monitoring
screw.
Engine oil (15W/50) (
–
Mount and tighten the gear oil monitoring screw.
Guideline
Screw, gear oil level check
–
Mount and tighten screw cap
B01670-10
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
–
–
Start the engine and check that it is oil-tight.
.
2
p. 202)
.
2
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
M6 10 Nm (7.4 lbf ft)
162