7
HANDLEBAR, CONTROLS
7.6
Adjusting the play in the throttle cable
Preparatory work
–
Fold the seat up. (
–
Remove the fuel tank. (
–
Check the throttle cable routing. (
Main work
–
Move the handlebar to the straight-ahead position.
–
Push back sleeve
–
Ensure that the throttle cable sleeve is pushed fully into adjusting screw
–
Loosen nut
–
Turn adjusting screw
grip.
Guideline
B01676-10
Throttle cable play
–
Tighten nut
–
Slide on sleeve
–
Check the throttle grip for smooth operation.
400192-11
Finishing work
–
Check the play in the throttle cable. (
–
Install the fuel tank. (
–
Lock the seat. (
p. 62)
p. 65)
p. 33)
.
1
.
3
so that there is play
2
.
3
.
1
p. 65)
p. 62)
in the throttle cable at the throttle
A
2... 3 mm (0.08... 0.12 in)
p. 33)
34
.
2