Microscan MS-850 User Manual page 77

Preamble
Format: <Kdstatus,preamble character(s)>
status:
preamble character(s):
0 = Disabled send one to four preamble characters except a null
1 = Enabled (00H). Default is ^M.
Example: To enable Preamble an FF (form feed), send <Kd1,^L>.
Postamble
Format: <Kestatus,postamble character(s)>
status: postamble character(s):
0 = Disabled Enter one to four postamble characters except a
1 = Enabled null (00H). Default characters are ^M^J.
Example: To disable Postamble, send <Ke0>.
LRC
Format: <Kcstatus>
status:
0 = Disabled
1 = Enabled
Example: To enable LRC, send
Response Timeout
Format: <KAtimeout setting>
timeout setting:
Default is 12 (ms).
Any number from 0 to 65,000 (a zero causes an indefinite wait).
Example: To change Response Timeout to 30 ms, send <KA30>.
Intercharacter Delay
Format: <KBtime interval>
time interval (between characters in milliseconds):
Default is 0.
Any number from 0 to 255.
Example: To change Intercharacter Delay to 30 ms, send <KB30>.
MS-850 Raster Scanner User's Manual
<Kc1>.
Protocol
3-9