Microscan MS-850 User Manual page 51

Fixed Code Length
Default: Disabled
Options: Disabled, Enabled
Used to increase data integrity by ensuring that only one label length will be accepted.
Code Length
Default: 10
Options: 1 to 2710
Note Fixed Code Length must be enabled for Code Length to take effect.
:
Allows you to specify the exact number of characters that the scanner will recognize
(this does not include start and stop). The scanner will ignore any code not having the
specified length.
UPC
Status
Default: Disabled
Options: Disabled, Enabled
When enabled, the scanner will read UPC version A and UPC version E only.
EAN
Default: Disabled
Options: Disabled, Enabled
Note: UPC must be enabled for EAN to take effect.
When EAN is enabled, the scanner will read UPC version A, UPC version E, EAN 13,
and EAN 8. It will also append a leading zero to UPC version A label information and
transmit 13 digits. If you do not want to transmit 13 digits when reading UPC version
A labels, disable EAN.
Supplementals
Default: Disabled
Options: Disabled, Enabled, Required
Allows the scanner to read supplemental bar code data that has been appended to the
standard UPC or EAN codes.
MS-850 Raster Scanner User's Manual
Code Type Menu
2-27