Protocols And Standards; Rrpp Configuration Task List - H3C S9500E Series Configuration Manual

Figure 13 Schematic diagram for an intersecting-ring load balancing network

Protocols and standards

RFC 3619 Extreme Networks' Ethernet Automatic Protection Switching (EAPS) Version 1 is related
to RRPP.

RRPP configuration task list

You can create RRPP domains based on service planning, specify control VLANs and data VLANs
for each RRPP domain, and then determine the ring roles and node roles based on the traffic
paths in each RRPP domain.
Complete the following tasks to configure RRPP:
Task
Creating an RRPP domain
Configuring control VLANs
Configuring protected VLANs
Configuring RRPP
rings
Activating an RRPP domain
Remarks
Required
Perform this task on all nodes that you want to assign to the
RRPP domain.
Required
Perform this task on all nodes in the RRPP domain.
Required
Perform this task on all nodes in the RRPP domain.
Required
Configuring RRPP
ports
Perform this task on all nodes in the RRPP domain.
Required
Configuring RRPP
nodes
Perform this task on all nodes in the RRPP domain.
Required
Perform this task on all nodes in the RRPP domain.
57