H3C S9500E Series Configuration Manual page 153

Routing switches
Hide thumbs Also See for S9500E Series:
Table of Contents

Advertisement

Auth Type
Virtual IP
Virtual MAC
Master IP
VRRP Track Information:
Track Interface: Vlan3
Display detailed information of VRRP group 1 on Switch B.
[SwitchB-Vlan-interface2] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Master IP
The above information shows that in VRRP group 1 Switch A is the master, Switch B is the backup
and packets sent from Host A to Host B are forwarded by Switch A.
If interface VLAN-interface 3 on Switch A is not available, you can still ping Host B successfully
on Host A. You can use the display vrrp ipv6 verbose command to view the detailed
information of the VRRP group.
If interface VLAN-interface 3 on Switch A is not available, the detailed information of VRRP group
1 on Switch A is displayed.
[SwitchA-Vlan-interface2] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
: Simple
: FE80::10
1::10
: 0000-5e00-0201
: FE80::1
: Standard
: Virtual MAC
: 1
: Up
: 100
: Yes
: Simple
: FE80::10
1::10
: FE80::1
: Standard
: Virtual MAC
: 1
: Up
: 110
: Yes
: Simple
153
Key
: hello
State : Up
Adver Timer
: 500
State
: Backup
Running Pri
: 100
Delay Time
: 5
Key
: hello
Adver Timer
: 500
State
: Backup
Running Pri
: 80
Delay Time
: 5
Key
: hello
Pri Reduced : 30

Advertisement

Table of Contents
loading

Table of Contents