Vrrp Load Balancing Mode Configuration Example - H3C S9500E Series Configuration Manual

Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Master IP
Display detailed information of the VRRP group on Switch B.
[SwitchB-Vlan-interface3] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 2
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Master IP
Interface Vlan-interface3
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
The above information shows that in VRRP group 1 Switch A is the master, Switch B is the backup
and hosts with the default gateway of 202.38.160.100/25 accesses the Internet through Switch
A; in VRRP group 2 Switch A is the backup, Switch B is the master and hosts with the default
gateway of 202.38.160.200/25 accesses the Internet through Switch B.

VRRP load balancing mode configuration example

Network requirements
•
Switch A, Switch B, and Switch C belong to VRRP group 1 with the virtual IP address of
10.1.1.1/24.
: Up
: 100
: Yes
: None
: 202.38.160.200
: 202.38.160.131
: Standard
: Virtual MAC
: 1
: Up
: 100
: Yes
: None
: 202.38.160.100
: 202.38.160.1
: 2
: Up
: 110
: Yes
: None
: 202.38.160.200
: 0000-5e00-0102
: 202.38.160.131
141
State : Backup
Running Pri : 100
Delay Time : 0
Adver Timer : 1
State : Backup
Running Pri : 100
Delay Time : 0
Adver Timer : 1
State : Master
Running Pri : 110
Delay Time : 0