H3C S9500E Series Configuration Manual page 198

Configure track entry 1, and associate it with Reaction entry 1 of the NQA test group (with the
administrator admin, and the operation tag test).
[SwitchA] track 1 nqa entry admin test reaction 1
Verify the configuration
6.
Display information of the track entry on Switch A.
[SwitchA] display track all
Track ID: 1
Status: Positive
Notification delay: Positive 0, Negative 0 (in seconds)
Reference object:
NQA entry: admin test
Reaction: 1
Display the routing table of Switch A.
[SwitchA] display ip routing-table
Routing Tables: Public
Destinations : 5
Destination/Mask
10.1.1.0/24
10.2.1.0/24
10.2.1.2/32
127.0.0.0/8
127.0.0.1/32
The output information above shows the NQA test result, that is, the next hop 10.2.1.1 is
reachable (the status of the track entry is Positive), and the configured static route is valid.
Remove the IP address of interface VLAN-interface 3 on Switch B.
<SwitchB> system-view
[SwitchB] interface vlan-interface 3
[SwitchB-Vlan-interface3] undo ip address
Display information of the track entry on Switch A.
[SwitchA] display track all
Track ID: 1
Status: Negative
Notification delay: Positive 0, Negative 0 (in seconds)
Reference object:
NQA entry: admin test
Reaction: 1
Display the routing table of Switch A.
Routes : 5
Proto Pre Cost
Static 60 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
198
NextHop Interface
10.2.1.1 Vlan3
10.2.1.2 Vlan3
127.0.0.1 InLoop0
127.0.0.1 InLoop0
127.0.0.1 InLoop0