H3C S9500E Series Configuration Manual page 188

Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
VRRP Track Information:
Track Object
Display detailed information about VRRP group 1 on Switch B.
[SwitchB-Vlan-interface2] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Master IP
The above output information shows that in VRRP group 1, Switch A is the master and Switch B is
a backup. Packets from Host A to Host B are forwarded through Switch A.
When there is a fault on the link between Switch A and Switch C, you can still successfully ping
Host B on Host A. Use the display vrrp command to view information about VRRP group 1.
Display detailed information about VRRP group 1 on Switch A when there is a fault on the link
between Switch A and Switch C.
[SwitchA-Vlan-interface2] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
: 1
: Up
: 110
: Yes
: Simple
: 10.1.1.10
: 0000-5e00-0101
: 10.1.1.1
: 1
: Standard
: Virtual MAC
: 1
: Up
: 100
: Yes
: Simple
: 10.1.1.10
: 10.1.1.1
: Standard
: Virtual MAC
: 1
: Up
: 110
188
Adver Timer : 5
State : Master
Running Pri : 110
Delay Time : 5
Key : hello
State : Positive
Adver Timer : 5
State : Backup
Running Pri : 100
Delay Time : 5
Key : hello
Adver Timer : 5
State : Backup
Running Pri : 80
Pri Reduced : 30