H3C S9500E Series Configuration Manual page 134

Routing switches
Hide thumbs Also See for S9500E Series:
Table of Contents

Advertisement

Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
Display detailed information of VRRP group 1 on Switch B.
[SwitchB-Vlan-interface2] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Master IP
The above information shows that in VRRP group 1 Switch A is the master, Switch B is the backup
and packets sent from Host A to Host B are forwarded by Switch A.
If Switch A fails, you can still ping through Host B on Host A. Use the display vrrp verbose
command to view the detailed information of the VRRP group on Switch B.
If Switch A fails, the detailed information of VRRP group 1 on Switch B is displayed.
[SwitchB-Vlan-interface2] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
The above information shows that if Switch A fails, Switch B becomes the master, and packets
sent from Host A to Host B are forwarded by Switch B.
: Yes
: None
: 202.38.160.111
: 0000-5e00-0101
: 202.38.160.1
: Standard
: Virtual MAC
: 1
: Up
: 100
: Yes
: None
: 202.38.160.111
: 202.38.160.1
: Standard
: Virtual MAC
: 1
: Up
: 100
: Yes
: None
: 202.38.160.111
: 0000-5e00-0101
: 202.38.160.2
134
Delay Time
: 5
Adver Timer
: 1
State
: Backup
Running Pri
: 100
Delay Time
: 5
Adver Timer
: 1
State
: Master
Running Pri
: 100
Delay Time
: 5

Advertisement

Table of Contents
loading

Table of Contents