H3C S9500E Series Configuration Manual page 137

Routing switches
Hide thumbs Also See for S9500E Series:
Table of Contents

Advertisement

Virtual MAC
Master IP
VRRP Track Information:
Track Interface: Vlan3
Display detailed information of VRRP group 1 on Switch B.
[SwitchB-Vlan-interface2] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Master IP
The above information shows that in VRRP group 1 Switch A is the master, Switch B is the backup
and packets sent from Host A to Host B are forwarded by Switch A.
If interface VLAN-interface 3 through which Switch A connects to the Internet is not available, you
can still ping Host B successfully on Host A. Use the display vrrp verbose command to view
the detailed information of the VRRP group.
If VLAN-interface 3 on Switch A is not available, the detailed information of VRRP group 1 on
Switch A is displayed.
[SwitchA-Vlan-interface2] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Master IP
VRRP Track Information:
Track Interface: Vlan3
: 0000-5e00-0101
: 202.38.160.1
: Standard
: Virtual MAC
: 1
: Up
: 100
: Yes
: Simple
: 202.38.160.111
: 202.38.160.1
: Standard
: Virtual MAC
: 1
: Up
: 110
: Yes
: Simple
: 202.38.160.111
: 202.38.160.2
137
State : Up
Adver Timer
: 5
State
: Backup
Running Pri
: 100
Delay Time
: 0
Key
: hello
Adver Timer
: 5
State
: Backup
Running Pri
: 80
Delay Time
: 0
Key
: hello
State : Down
Pri Reduced : 30
Pri Reduced : 30

Advertisement

Table of Contents
loading

Table of Contents