H3C S9500E Series Configuration Manual page 203

Display detailed information about VRRP group 1 on Switch A.
[SwitchA-Vlan-interface2] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
VRRP Track Information:
Track Object
Display detailed information about VRRP group 1 on Switch B.
[SwitchB-Vlan-interface2] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Master IP
The above output information shows that in VRRP group 1, Switch A is the master and Switch B is
a backup. Packets from Host A to Host B are forwarded through Switch A.
Shut down the uplink interface VLAN-interface 3 on Switch A.
[SwitchA-Vlan-interface2] interface vlan-interface 3
[SwitchA-Vlan-interface3] shutdown
After shutting down the uplink interface on Switch A, you can still successfully ping Host B on Host
A. Use the display vrrp command to view information about VRRP group 1.
: Standard
: Virtual MAC
: 1
: Up
: 110
: Yes
: None
: 10.1.1.10
: 0000-5e00-0101
: 10.1.1.1
: 1
: Standard
: Virtual MAC
: 1
: Up
: 100
: Yes
: None
: 10.1.1.10
: 10.1.1.1
203
Adver Timer : 1
State : Master
Running Pri : 110
Delay Time : 0
State : Positive
Adver Timer : 1
State : Backup
Running Pri : 100
Delay Time : 0
Pri Reduced : 30