All Limits: This information
window shows all the high and
low alarm limits for all
parameters that are currently
being monitored.
•
To Set Parameter Alarm
Limits:
Select MORE MENUS.
–
–
Select ALARM
CONTROL.
–
Select ALL LIMITS.
–
An Information Window is
displayed.
–
Turn Trim Knob to move
the cursor in front of the
desired parameter that
requires an alarm limit
adjustment and press to
highlight parameter label.
–
Turn Trim Knob to
highlight HIGH LIMIT or
LOW LIMIT and press to
select.
–
Turn Trim Knob to change
limit and press to select.
–
Turn Trim Knob to
highlight PARAMETER
LABEL and press to select.
Move the cursor in front of
–
RETURN to close window
and press to select and
close window.
–
Select MORE MENUS.
–
Select MAIN MENU to
exit.
NOTE: Parameter alarm limits can also be adjusted in the
individual parameter menus.
NOTE: Any changes made with the Parameter Alarm Level
menu options are temporary and return to the default settings
upon patient discharge.
TAB
TRIM
COVER &
NON-TAB
TRIM
COVER &
NON-TAB
TRIM
TAB
TRIM