Parameter Limits - GE DASH 3000 V5 Quick Reference Manual

3. CO monitoring begins when the patient is
2
properly connected and a breath is detected.
Numerics will be displayed in the CO
parameter window and the CO
be displayed on the screen.
To Adjust CO

Parameter Limits:

2
Select the CO parameter window.
2
Select the CO LIMITS
2
Select desired limit to be adjusted
(Expired CO , Inspired CO
2
Respiration Rate, No Breath).
Rotate the Trim Knob until the desired limit
is displayed.
Press the Trim Knob to confirm change and
close menu.
Repeat the procedure to adjust other CO
parameter limits.
2
waveform may
2
Respiration Rate
,
2
CO
2
CapnoFlex LF CO
Parameter Window
2
Inspired and Expired CO
2
TAB
TRIM
COVER &
NON-TAB
TRIM
Limits
and Units
Values
2
COVER &
NON-TAB
TRIM
TAB
TRIM