Identify V Lead: Identifies the
V Lead being used for ECG and
ST analysis.
•
To Change the V Lead:
–
Select the ECG parameter
window.
Select ST ANALYSIS.
–
–
Select IDENTIFY V LEAD.
–
Move the cursor in front of
the desired V Lead and
press to select.
NOTE: With a 5-leadwire cable, the V Lead is used in ST
Analysis and arrhythmia analysis.
Changing this label changes the label on the V-lead trend and
complex.
NOTE: With a 10-leadwire cable, the V Lead is used for
arrhythmia analysis only. Changing this label DOES NOT
change the label on the ST display. Use the ST display menu
to change the label.
–
Select MAIN MENU to
exit.
TAB
TRIM
COVER &
NON-TAB
TRIM
COVER &
NON-TAB
TRIM
TAB
TRIM