Invasive Pressures — Scale:
•
To Change the Scale of the
Pressure Waveform:
–
Select the desired pressure
parameter window.
–
Select SCALES.
–
A popup menu opens
indicating the available
options.
–
Move the cursor in front of
the desired scale and press
to select.
–
Select MAIN MENU to
exit.
NOTE: AUTO is an option only if the pressure has been zeroed.
Auto-scaled waveforms graph differently than displayed.
Invasive Pressures —
Cursor:
•
The cursor option places a
moveable, dashed, horizontal
line across the pressure
waveform to give accurate
values at selected points on
the pressure waveform.
Numeric data is displayed to
the right of the cursor.
•
To Use the Cursor Option:
–
Select the desired pressure
parameter window.
–
Select CURSOR.
–
A popup menu opens
indicating the available
options.
–
Turn the Trim Knob to
move the cursor and press
to select.
–
Select MAIN MENU to
exit.
•
To Remove the Cursor from
the Waveform:
Select the desired pressure
–
parameter window.
Select CLEAR CURSOR.
–
–
This is a direct action menu
option.
–
Select MAIN MENU to
exit.
TAB
TRIM
COVER &
NON-TAB
TRIM
COVER &
NON-TAB
TRIM
TAB
TRIM