NBP Go/Stop: The NBP
Go/Stop button on the monitor
is a quick way to start or stop a
blood pressure measurement.
NBP Auto: This option allows
the monitor to be programmed
to take NBP readings
automatically at specific time
intervals.
•
To Program NBP for the
Auto Mode:
–
Select the NBP.
–
Select NBP AUTO.
A popup menu appears.
–
–
Select MAIN MENU to
exit.
NOTE: The NBP measurement for the auto option is set in
the monitor defaults and can be timed in two different ways:
1. Regular Timing: NBP measurement is taken at a specific
time interval regardless of the actual clock times.
2. Clock Sync Timing: NBP measurement is synchronized to
specific clock times.
NOTE: Turning the Auto mode Off, then On, restarts the timing
cycle.
NOTE: If a time interval greater than 60 minutes is selected,
AUTO is displayed in the NBP parameter window.
NBP
NBP GO/STOP:
Starts and Stops NBP.
TAB
TRIM
COVER &
NON-TAB
TRIM
COVER &
NON-TAB
TRIM
TAB
TRIM