All Spo 2 Technologies Include The Following Menu Options; Spo 2 Rate Volume; Spo 2 Limits - GE DASH 3000 V5 Quick Reference Manual

Bedside monitoring
Table of Contents

Advertisement

The Dash monitor incorporates
several different technology
options for interpreting SPO
2
values:
Masimo Set
Nellcor (Oxismart XL)
GE
All SPO
technologies include
2
the following menu options:
Size: Adjusts the size of the
displayed SPO2 waveform.
The default size is 1X.
To Change the Size:
Select SPO
.
2
Select SIZE.
Turn the Trim Knob to
highlight the desired size
and press to select.
Select MAIN MENU to
exit.
Rate: A pulse rate is derived
from the SPO
signal and is
2
displayed in the parameter
window.
To Turn the Displayed Rate
On/Off:
Select SPO
.
2
Select RATE.
This menu option directly
turns the rate option On or
Off.
Select MAIN MENU to
exit.
SPO
Menu — GE and Nellcor Probes
2
SPO
Rate Volume: The rate
2
volume turns on a tone that
sounds each time an SPO
2
is detected. This is a variable
pitch tone which changes as the
patient's saturation level
changes. A drop in saturation
results in a change in pitch of
the tone.
To Change the Rate Volume:
Select SPO
.
2
Select RATE VOLUME.
Turn the Trim Knob to the
desired SPO
volume and
2
press to select.
Select MAIN MENU to
exit.
NOTE: Turning the SPO
rate volume on automatically turns
2
the QRS volume off and vice-versa.
NOTE: When two SPO
sites are being monitored, the rate
2
volume can only be turned on for one site at a time.
SPO
Limits: Allows SPO
2
percent and rate alarm limits to
pulse
be adjusted.
To Change SPO
Select SPO
Select SPO
Select the desired SPO
limit.
Turn the Trim Knob to the
desired SPO
press to select.
Select MAIN MENU to
exit.
Persistent SPO
parameter box to remain on the
display after the SPO
been disconnected. The
parameter box displays PROBE
OFF PATIENT the cable is
disconnected and an alarm
sounds at both the monitor and
central station. This option may
be turned on or off in the SPO2
menu if enabled in the defaults.
NOTE: The type of SPO
technology available is based on
2
equipment purchased.
TAB
TRIM
COVER &
NON-TAB
TRIM
2
Limits:
2
.
2
LIMITS.
2
2
limit and
2
allows the SPO
2
2
cable has
2
COVER &
NON-TAB
TRIM
TAB
TRIM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dash 4000 v5

Table of Contents