View All Ecg; Arrhythmia - GE DASH 3000 V5 Quick Reference Manual

View All ECG: Allows six leads
of ECG to be viewed on the
display.
• To View All ECG:
– Select ECG.
– Select VIEW ALL ECG.
– Six waveforms will be
displayed.
– Press GRAPH GO/STOP to
print displayed leads.
Press the Trim Knob to
–
remove displayed leads.
– Select MAIN MENU to
exit.
Arrhythmia: Arrhythmia
processing can be manually
changed to one of the following
conditions:
Full: Expands detection to all
•
arrhythmia conditions
defined by the software level.
• Lethal: Arrhythmia
processing is limited to
Asystole, VFib/VTac and
VTach.
Off: Disables all arrhythmia
•
alarms. Parameter alarms
remain active.
• To Change the Arrhythmia
Processing Mode:
– Select ECG.
– Select ARRHYTHMIA.
– Turn the Trim Knob to
move the cursor in front of
the desired arrhythmia
processing mode and press
to select.
– Select MAIN MENU to
exit.
TAB
TRIM
COVER &
NON-TAB
TRIM
COVER &
NON-TAB
TRIM
TAB
TRIM