Rover
To Discharge a Patient
•
Remove all ECG leads from
the patient.
•
Select MORE MENUS.
•
Select ADMIT MENU.
•
Select DISCHARGE
PATIENT.
•
Turn the Trim Knob to move
the cursor in front of
Discharge and press to select.
•
A message DISCHARGED
and ALL ALARMS OFF will
appear on the display when
the monitor is in a discharged
mode.
NOTE: It is recommended to leave the network cable plugged
in and the Dash display on for two minutes following
discharge (if applicable).
•
Push the Power button to turn
the display off.
•
Store the monitor with AC
power cord plugged in and
display off.
TAB
TRIM
COVER &
NON-TAB
TRIM
COVER &
NON-TAB
TRIM
TAB
TRIM