GE DASH 3000 V5 Quick Reference Manual page 85

CapnoFlex LF CO
2
the concentration of carbon dioxide (CO
CapnoFlex LF CO Module Connection to Dash Monitor
2
is a continuous, non-invasive technique for determining
CapnoFlex LF CO
Caution: Do not use this module on patients that cannot tolerate the removal of
50ml / 1 min from their total minute ventilation.
1. Plug the module into the CO
on the Dash monitor
CapnoFlex LF CO
) in respiratory gas.
2
Setup Procedure
2
2
The CO parameter window will automatically display once the
2
module is connected.
The message "WARMING UP" will be displayed for approximately
two minutes after the module has been connected.
CO Parameter Window with Warming Up Message
2
Refer to Operators Manual for Any Specific Questions.
!
For Customer Support or Clinical Helpline,
Call: 1-800-558-7044.
2
connector (yellow port)
TAB
TRIM
COVER &
NON-TAB
TRIM
COVER &
NON-TAB
TRIM
TAB
TRIM