Troubleshooting - GE DASH 3000 V5 Quick Reference Manual

CO Parameter Menu Options
2
Units:
Change the units of measure for Expired
CO and Inspired CO .
2 2
CO Scale:
Selects a scale for the displayed CO
2
capnogram.
CO Limits: Displays a new menu and information
2
window to adjust Expired CO
Respiration Rate and No Breath limits.
O Compensation:
Compensates for effects of
2
O on CO reading.
2 2
MESSAGE
CHECK ADAPTER/
ADAPTER CAL
NOTE: Refer to the CO chapter of the Dash Patient Monitor Operators Manual for additional information
2
CapnoFlex LF CO

— Troubleshooting

2
2
, Inspired CO ,
2 2
Troubleshooting
PROBLEM
The cannula is not connected
The cannula is blocked
The module was calibrated
without the cannula connected
CO Averaging:
Opens a pop-up menu to select a
2
time for averaging CO readings.
2
Calibrate Sample Line:
Opens a pop-up menu to
calibrate the sample line.
Speed:
Change the sweep speed of the displayed
CO waveform.
2
SOLUTION
Connect cannula to the module
Replace the cannula
Connect the cannula to the
module and calibrate
TAB
TRIM
COVER &
NON-TAB
TRIM
COVER &
NON-TAB
TRIM
TAB
TRIM