Assembly Replacement Procedures
Midplane Assembly
Midplane Assembly
Removal
1. Remove the instrument outer case. Refer to the
2. Remove the rear panel. Refer to the
3. Remove the top brace and reference bracket. Refer to the
4. Remove the reference assembly. Refer to the
5. Remove the CPU assembly. Refer to the
6. Remove the power supply assembly. Refer to the
7. Refer to
Figure 15-42
Power Supply Bracket
444
removal procedure.
removal procedure.
removal procedure.
procedure.
Assembly"
removal procedure.
Figure
15-42. Remove the power supply support bracket (1) by
removing the two screws (2).
"Rear Panel"
"CPU Assembly"
Keysight NFA Series Noise Figure Analyzers Service Guide
"Instrument Outer Case"
removal procedure.
"Top Brace"
"Reference Assembly"
removal
"Power Supply