Low Band Switch - Keysight N8973B Service Manual

Assembly Replacement Procedures
RF Area (N8976B)

Low Band Switch

Removal
1. Refer to
2. Remove the semi-rigid cables W3, W8, and W9 using the 5/16 inch
3. Remove the two screws (2) using the T-10 driver. The low band switch
Figure 15-17 Low Band Switch Cable Removal
Keysight NFA Series Noise Figure Analyzers Service Guide
Figure 15-17
wrench.
and bracket (1) can now be removed from the chassis.
and Figure 15-18. Remove the ribbon cable W18.
411