Low Band Switch - Standard Rf/Microwave Instruments - Keysight N8973B Service Manual

Assembly Replacement Procedures
RF Area (N8973B, 74B, 75B)

Low Band Switch - Standard RF/Microwave Instruments

Removal
1. Refer to
2. Remove the semi-rigid cables W3, W8, and W9 using the 5/16 inch
W8 will not be present on the N8973B.
3. Remove the two screws (2) using the T-10 driver. The low band switch
Figure 15-9 Low Band Switch Removal
Keysight NFA Series Noise Figure Analyzers Service Guide
Figure 15-9. Remove the ribbon cable W18.
wrench.
(1) can now be removed from the chassis.
401