After An Instrument Repair - Keysight N8973B Service Manual

Overview

After an Instrument Repair

After an Instrument Repair

If any instrument assemblies have been repaired or replaced, perform the
related adjustments and performance verification tests. These tests are done
using the N7814A Keysight X-Series Signal Analyzer Calibration Application
Software. Refer to
post-repair adjustments and performance tests based on which hardware has
been changed.
Information regarding the N7814A Keysight X-Series Signal Analyzer
Calibration Application Software can be found at
http://www.keysight.com/find/calibrationsoftware
Keysight NFA Series Noise Figure Analyzers Service Guide
Chapter 16, "Post-Repair Procedures," for a list of
37