Option Prc - Keysight N8973B Service Manual

Assembly Replacement Procedures
Instrument Outer Case

Option PRC

Removal
1. Disconnect the instrument from ac power.
Figure 15-4 Bail Handle Removal
2. Using the T-20 driver, remove the four screws (two on each side) (6) that
Keysight NFA Series Noise Figure Analyzers Service Guide
Refer to Figure 15-4. Using the T-20 driver, remove the four screws (two
on each side) (1) that hold the bail handle (2) to the front frame.
hold the strap handle plugs (5) in place.
395