Table of Contents
Advertisement
4.9 Maintenance
4.9.1 Switch Maintenance
This chapter shows how to upgrade the firmware, how to save the switch running configure and how to download/upload the
configure file, etc.
4.9.1.1 Web Firmware Upgrade
This page facilitates an update on the firmware controlling the switch. The Web Firmware Upgrade screen in
appears.
To open Firmware Upgrade screen, perform the following:
1.
Click Maintenance -> Web Firmware Upgrade.
2.
The Firmware Upgrade screen is displayed as in
3.
Click the "
4.
Select on the firmware and then click "
5.
Once the software is loaded to the system successfully, the following screen appears. The system will load the new
software after reboot.
DO NOT Power OFF
complete.
Do not quit the Firmware Upgrade page without pressing the "OK" button after the image is
loaded. Or the system won't apply the new firmware. User has to repeat the firmware
upgrade processes.
Figure 4-9-1-1: Web Firmware Upgrade Page Screenshot
Figure 4-9-1-1
"button of the Main page; the system would pop up the file selection menu to choose firmware.
". The Software Upload Progress would show the file with upload status.
Figure 4-9-1-2: Software Successfully Loaded Notice Screen
the Industrial Managed PoE+ Switch until the update progress is
User's Manual of IGS-10020HPT-U
371
Figure 4-9-1-1
Advertisement
Table of Contents
