Tektronix TDS1000B Series Operator's Manual page 77

Getting Started with the TDS1000B and TDS2000B Series Oscilloscopes
Menu
Option
Coupling
Bandwidth
Limit
Volts/Div
TDS1000B and TDS2000B Series Oscilloscopes – Operator Training Kit
Description
You use this menu option to select the
coupling type for a channel. You can
select AC, DC, or Ground.
You use this menu option to set the
bandwidth limit of a channel at either the
bandwidth of the oscilloscope (40 MHz,
60 MHz, 100 MHz, or 200 MHz) or 20
MHz. A lower bandwidth limit decreases
the displayed noise and results in a
clearer display. This lowered bandwidth
also limits the display of higher speed
details on the selected signal.
You use this menu option to select the
incremental sequence of the VOLTS/DIV
knob as Coarse or Fine. The Coarse
option defines a 1-2-5 incremental
sequence. The Fine option helps you
change the resolution by small
increments within the coarse settings.
2
2-31