Tektronix TDS1000B Series Operator's Manual page 175

The following procedure enables you to add waveforms to
verify the operation of a circuit that adds or subtracts
signals.
1. On the top of the front panel, push DEFAULT SETUP.
2. On the top of the front panel, push the AUTOSET
button.
3. In the VERTICAL section, push the MATH MENU
button.
4. Push the appropriate side-screen menu button to select
Operation +.
5. Push the appropriate side-screen menu button to select
CH1+CH2.
6. Turn Multipurpose know clockwise to set the math
waveform Vertical Scale to 5.00V.
TDS1000B and TDS2000B Series Oscilloscopes – Operator Training Kit
Using VERTICAL Controls
3
3-15