Tektronix TDS1000B Series Operator's Manual page 114

2
Getting Started with the TDS1000B and TDS2000B Series Oscilloscopes
Menu
Option
Type
Source
Delta
2-68 TDS1000B and TDS2000B Series Oscilloscopes – Operator Training Kit
Description
You use this menu option to specify
cursor measurements of Amplitude or
Time.
You use this menu option to choose
different cursor signal sources, such as
CH1, CH2, MATH, Ref A, or Ref B, for
a displayed waveform on 2-channel
oscilloscopes. In addition, 4-channel
oscilloscopes have CH3, CH4, Ref C,
and Ref D as additional cursor signal
sources.
You use this menu display to observe
the numerical difference between the
quantities represented by the cursors.