Tektronix TDS1000B Series Operator's Manual page 181

4. On the top of the front panel, push DEFAULT SETUP.
5. On the top of the front panel, push the AUTOSET
button.
6. In the VERTICAL section, push the CH2 MENU button.
Push the Probe menu option button. Next push the
Current menu option button.
7. On the Training 1 signal board, turn the ADJ knob to
display the CH1 and CH2 waveforms in phase.
8. In the VERTICAL section, push the MATH MENU
button.
9. Push the appropriate side-screen menu button to select
Operation x.
10. Push the appropriate side-screen menu button to select
CH1xCH2.
TDS1000B and TDS2000B Series Oscilloscopes – Operator Training Kit
Using VERTICAL Controls
3
3-21