Tektronix TDS1000B Series Operator's Manual page 240

6
Using Menu Function Controls
MEASURE button
The MEASURE Menu Function Controls allow you to make
predefined automated measurements of waveforms. There
are 11 types of measurements available and you can
display up to 5 types at a time.
SAVE/RECALL button
You use the SAVE/RECALL Menu Function Controls to
save and recall oscilloscope setups or waveforms to
nonvolatile memory locations or to save and recall
oscilloscope setups, waveform images or waveforms a
USB flash drive. The oscilloscope can store 10
oscilloscope setups and 2 waveforms (4 waveforms each
on the TDS2014 and TDS2024 oscilloscopes) to
nonvolatile memory.
UTILITY button
You use the UTILITY Menu Function Controls to access
various oscilloscope setup utility functions, check the
system status, set up hard copy and communication
utilities, perform self-calibration for the oscilloscope, and
change the language used in the oscilloscopes.
6-4 TDS1000B and TDS2000B Series Oscilloscopes – Operator Training Kit