2
Getting Started with the TDS1000B and TDS2000B Series Oscilloscopes
Menu
Option
Multi-cycle
sine
Single-
cycle sine
FFT
Undo
Autoset
2-106
TDS1000B and TDS2000B Series Oscilloscopes – Operator Training Kit
Description
You use this menu option to display
several cycles with appropriate vertical
and horizontal scaling. The oscilloscope
displays Cycle RMS, Frequency, Period,
and Peak-to-Peak automatic
measurements.
You use this menu option to set the
horizontal scale to display about one
cycle of a waveform. The oscilloscope
displays Mean and Peak-to-Peak
automatic measurements.
You use this menu option to convert the
input time-domain signal into its sine
wave frequency (spectral) components
and display the result as a graph of
frequency versus magnitude (spectrum).
You use this menu to recall the previous
setup.
Need help?
Do you have a question about the TDS1000B Series and is the answer not in the manual?