Table of Contents
Advertisement
(2) DATA settings
This menu is used to specify setting items related to capture and calculations.
<Capturing data to the internal RAM>
Sampling Interval
Data capture destination
[Internal RAM]
[Internal Flash Memory]
or
[USB Memory]
Function 1
Function 2
[xxx] shows a case in which xxx is selected from available selections.
Data capture file name
Setting
Folder (File)
Destination : MEM, USB1
Folder
File
Name Type
Auto or User
File Format
Binary (GBD), Text (CSV)
(2)-1 Sampling Interval
Specifies intervals used to capture data.
Capture destination
Internal RAM
Internal flash memory
USB memory
<Capturing data to the internal flash memory or USB memory>
Setting
Number of capture points
Auto Save
[On]
File Name
File Name
Selection
: Text input (if it is automatically named)
: Text input (if it is user-defined)
10, 20, 50, 100, 200, 500us; 1, 2, 5, 10, 20, 50, 100, 200, 500ms; 1, 2, 5, 10, 20, 30s; 1min
1, 2, 5, 10, 20, 50, 100, 200, 500ms; 1, 2, 5, 10, 20, 30s; 1min
1, 2, 5, 10, 20, 50, 100, 200, 500ms; 1, 2, 5, 10, 20, 30s; 1min
Selection
10, 20, 50, 100, 200, 500 us; 1, 2, 5, 10, 20, 5
Internal RAM, Internal Flash Memory, USB Memory
1000 to 1000000
Off, On
* See the following section on the data capture
* See the following section on the data capture
Off, Average, Max, Min, Peak, RMS
Off, Average, Max, Min, Peak, RMS
Selections available
Settings and Measurement
3-23
Advertisement
Table of Contents
